Feed, rolled, tabular, disassembly cleaning is very convenient, in line with GMP requirements.
In recent years, vacuum technology, continuous improvement, continuous improvement, is now widely used in chemical, pharmaceutical, food, metallurgy, building materials, agricultural and vice industries and other industries. The discharge port: It is carried out, and multi-layer grading can be reached.
It is also known that the flow energy milling or Jet Mill is used to generate a high pressure using compressed air or superheated steam and generates an ultrasonic speed flow as a carrier of material particles by a nozzle to obtain a huge kinetic energy. Taking the RF type rotary belt forming device as an example, if the computer DCS distribution control system is used, the automated operation of the flow, granulation, delivery, packaging, etc. can be achieved, but also through various temperature, pressure, flow, speed and other sensors. Real-time monitoring system status, when the system status and process parameters change, timely feedback changes, send an alarm signal, and automatically adjust the system status according to the status adjustment parameters, and ensure the normal operation of the device.
The motor has a safe protection device, double protection motor and personality; in this process, it is necessary to pay attention to the failure, immediately cut off the power, and notify the professionals to overhaul, do not handle it, so as not to damage the equipment, occur danger. The measuring point of the dust is more than 10 times, and one electric welding is soldered.
There are 1 grinding wheel, 3 belt tails, 1 bulldozer, and 5 electric dust removal, 1 coal field discharge. The operation of the ultrafine pulverizer is related to the operator, wear labor protection products should be wear before work to ensure itself. With the extension of the use time, the following faults often appear: Powerful work when it is crushed; first we should understand these technologies, in order to better know its role, make better improvements to meet the needs of the industry.
The grading efficiency (extraction rate) is 60% to 90%, the grading efficiency is related to the material properties and the particle size of the particle size, the material is fluidity, the particle size requirements are high, and the efficiency is high, and the vice verse is low. High-pressure gas (compressed air, superheated steam or other gas) injected around the pulverizer, mixed with a high-speed air flow that is mixed with a solid material particles, which is constantly being hurt from the airflow from different angles, so that the mixed airflow Solid particles are refined and friction.
The equipment foundation should be strong and have enough strength, so that its host and motor installation can be successfully performed.
