Middle Trial: For large-scale high-speed mixer selection, sometimes it is not enough to use the small trial results, it is best to conduct a trial, the purpose of the trial is to verify the results of the small test, and provide further basis for the selection , But pay attention to a few points:
After all confirmation is normal, you can start feeding.
The conditions for installation conditions and production conditions. The discharge pipe is not smooth or the feed is too fast. It will cause the universal crushing air outlet; this is the use of vacuum pressure and dust pollution, breaking the narrow space limit, long short distance limit Lamp advantage.
Boot: Open the power switch of the power supply, enter the device operational program interface, check the case of each material. If there is noise and a crusher of noise and dust should be tested and dustproof measures to improve the working environment, which is beneficial to the health of the operator. Jet Mill, unlike other crushers, under high-speed airflow, the material impacts between the particles, the gas stream impacts shear effects and the impact of the material and other components, and shreds the material.
Jet Mill's safety operation procedures, its main contents:
Coping to check all lines, electrical components, etc. of Jet Mill, whether it works fine.
The ultrafine pulverizer has its main advantage is that the operation is simple and convenient, and it is also convenient to carry out the pour of the material, and its cleanup work. Fasteners, equipment foundations, bolt nuts, etc. are normal, there is no phenomenon such as loose, corrosion, or cracking, if it should be treated in time.
