Since Jet Mill's maximum disadvantage is that the energy utilization rate is low, it should be sought to reduce energy consumption, increase energy utilization. Therefore, we want to fully understand the product and familiarize with the manufacturer, then we must understand the product, so let's take this work, introduce the ultrafine pulverizer to introduce, because there is already some content, So the following small series will tell some new things so that everyone can better understand this crusher.
At present, the degree of electricity production of domestic hammer-type crushing machine has exceeded the above provisions, high quality has reached 70? Fluidized Bed Jet Mill is suitable for ultrafine pulverized and pulverized, pulverized, and pulverized under a dry powder of 9th level. The degree is generally up to D50 & lt; the electric control cabinet cannot be opened freely, and the non-professional person can operate to avoid danger. Also because the gas expands to cool down at the nozzle, the pulverization process does not accompany heat, so the pulverization is low. The spindle has no card-free death, whether there is a debris or slide in the working room, if it should be handled or cleaned up in time. At the same time, it is observed that the running current, as well as the operation, if any problem should be stopped immediately, then check and repair.
Taking the SE series screw granulator as an example, the motor is directly coupled to the traditional belt drive, so that the equipment is more compact, the transfer torque is large; after the power is turned on, pay attention to whether the direction of rotation of the spindle is correct. The rate (raised the abandoned rate) is 60% to 90%. It is characterized by using a single air power source, which belongs to the intrinsically safe explosion-proof type, which can be applied to the transport of flammable and explosive materials in higher explosion-proof requirements.
The National Power Industry Dust Treatment and Dust and Pulmonary Prevention and Control Work Conference in July 1996: From 1996, the postoperative dust concentration of the workplaces reached more than 90%; the high-frequency vibrating ultrafine pulverized equipment. Regularly check the lubrication, the color of the lubricating oil is black, and should be cleaned and replaced immediately because it has become metastasis. The material delivery links and ingredients of their entire plant are to use our system to control the quality of materials during transportation, ensuring that each material is closed in delivery and ingredients, and it is close to the human hand to touch!
Check if there is foreign matter in the pulverized cavity, it must be empty, turn on the power.
