1. Before installing the ultrafine pulverizer, check, if there is damage during transportation, etc. If the check is in a good condition, and everything is completed, you can only start installing, otherwise you cannot install it.
2. The ultrafine pulverizer should be ground to ensure the safety of the machine. Flat airflow mill is simple, easy to manufacture due to flat air flow milling, easy to manufacture, so it is widely used.
Structure: Mainly composed of a crushing chamber, a nozzle port, an air outlet, a gas flow outlet, a compressed air inlet, a grading area, and the like.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is fed into the pulverizing chamber by the feeder, a strong impact and dramatic friction make the material into a super fine product.
3. Before investing in use, it should be run and check for foreign matter in the machine. If there is foreign matter, it should be removed in time.
4. The startup of the mill should be operated in the order required by the airflow mill, and there will be problems.
5. Ultrafine pulverizer feed, should wait until the no-load current is stable, and the amount of feed should not be too large. Flat airflow mill is simple, easy to manufacture due to flat air flow milling, easy to manufacture, so it is widely used.
Structure: Mainly composed of a crushing chamber, a nozzle port, an air outlet, a gas flow outlet, a compressed air inlet, a grading area, and the like.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is fed into the pulverizing chamber by the feeder, a strong impact and dramatic friction make the material into a super fine product.
6. The cessation of the ultrafine pulverizer should stop the feeder first, then wait until 5 minutes, stop the host, dust collector and the classifying machine.
The above is the problem that should be paid attention to when plagiarging the pulverizer. If the device fails, contact the airflow mill manufacturer in time, and must not be repaired.
