After adding materials, during the machine, logistics grinding under the conditions of gas expansion, so that no high temperature is safe. The whole ceramic jaw crusher uses a good crushing technology and manufacturing level.
It is the preferred high-efficiency product for crushing, and is especially suitable for highway, railway, airport runway and other projects. Highway, railway, airport runway and other projects are mostly hard rocks such as basalt, the specifications are around 3-7 or 2-8 cm, and the broken material hardness is relatively large, and the general jaws (E-break) are not only low. And it is easy to worn.
The new jaw crusher relative to the traditional secondary jaw crusher, whether it is a life, maintenance rate, and the failure rate reflects its unparalleled superiority, and relative to the supporting use of conical breakage, stone plastic surgery The cost is still.
Jet Mill makes a complete set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided with the intersection of the multi-high pressure airflow. The crushing material is pulverized after the fan pulling force Airflow movement to the grading area, under the power of high-speed rotation, the thick centrifugal force generated by the high-speed rotation, the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizing region to continue pulverization.
The grinding of the material will also be even more uniform. The gas flow grinding will be cleaner, less pollution, because the self-grinding of the material is not subject to other non-metallic or chemical pollution in the case of gas expansion. Because the idea of working in the case of gas expansion can be counted as working in aseptic environment.
The application of gas flow mill is the application at low temperatures. Airflow grinding can be used in ultravailability ultrafine powder mill and pulverizing chamber minus 10 degrees, without having a liquid nitrogen solid solution. The production cost of cultivated land is high and the efficiency is high. Ultrafine pulverization, high purity processing and high efficiency processing make the machine in the pharmaceutical industry, the food and health industry, is important to reduce production costs. Materials with higher hardness can be machined, and the degree of wear of the equipment is small.
By adjusting the rotational speed of the impeller, a material of different particle size can be obtained. During the empty mill, the whole machine is sealed, the whole process is low, and the environmentally friendly is clean.
