What kind of knowledge points are there a knowledge point in safety?
The main thing, according to the introduction of the professional, there are two major aspects, since the safety operation procedures and safety precautions, since these two aspects, the following website www.yxhdsb.com will focus on introduce,
I hope everyone can let everyone The two have aware of understanding, so that the crusher is safely used, even a crushing machine.
1. Safety Operation Procedures
(1) Before the mechanical operation, enter the manual disk car, check whether the operation is flexible, whether there is a card resistance.
(2) The pulverizer should be empty to two minutes. During this period, there is no abnormal phenomenon, whether there is a leakage phenomenon in the machine, whether the components are working properly, if there is abnormal, the professional maintenance person should be notified immediately.
(3) After the pulverizer is applied, it is necessary to observe whether the particle size of the discharge has reached the requirements. If there is no requirements, it is necessary to adjust.
(4) The particle size of the material cannot be too large, so as to avoid blocking the machine, the machine cannot operate normally.
(5) Whether the temperature of the motor and the bearing is normal during mechanical operation.
(6) After stopping the run, or cut off the power when overhaul.
(7) After the operation is over, if there is a subsequent material, it should be cleaned and clean the workplace.
2. Safety Precautions
(1) The machine should be used in accordance with the requirements, and the machine cannot be used to use the machine.
(2) When the machine is working, it cannot be in the unsafe area.
(3) Operators should wear labor protection products before work, can't be sloppy.
(4) After the machine is turned on, there should be some people to guard and cannot stay.
(5) If the material occurs, it cannot be cleaned with the hand insertion to prevent danger.
(6) If the pulverizer is not completely stopped, the cover cannot be opened.
Welcome to Shandong ALPA Powder Machinery Co., Ltd.
