Basic requirements when crusher safety operation

The basic requirements of the pulverizer are also we must know,  their main contents are:
(1) When the crusher is running, the operator should stand in the safe area. Cannot stand in a dangerous area, Party B is dangerous. In addition, you can't do some dangerous movements, your hands cannot be crossed.
(2) The pulverizer should be firm during installation. If the operation is fixed, it should be fixed on the cement. If it is a flow job, it should be fixed to the base and the power machine and the belt wheel groove should be on the same turning plane.
(3) When the pulverizer is installed, check the fastening of its fasteners. If there is loose moment, it should be tightened in time. In addition, check how the tightness of the belt is appropriate.
(4) When the pulverizer is running, the operator should pay attention to how to operate, if any abnormality should be processed in time.
(5) The pulverizer is uniform, and the machine cannot be operated long-term overload, which will damage the machine.
(6) In the workplace, there is no flammable and explosive material or gas.