Grinding the ultra-microfinator understanding, we started today, first starting from its most basic knowledge, in the end, the host structure of the ultrafine crusher is introduced, thereby forming an article in the website, let everyone Learn.
First, the abrasive ultrafine pulverizer grinding the ultrafine pulverizer, it is a small pulverizer, mainly used to carry out fine grinding, because the size is small, so it can carry it with you, so in medicine, food, feed, chemical, ceramics These industries such as metallurgical minerals are widely used, and they can also smash high toughness, high-hardness materials.
Specifically, highlights, plant fibers: 8-20 um, 300-3000 mesh. Hard, brittle materials: 1-5 um, 600-15000 .
1. Technical parameters Power: 220V Power: 250W Runor: 442RPM Transmission Mode: Belt Drive Shape Size: 375 × 200 × 320mm Weight: 26kg Single Yield: 100 -300 grams
2. Features (1) can control grinding fineness by practice, the longer the practice, the higher the abrasive fineness of the material. (2) Simple structure, it is very convenient to clean and installation.
3. Working principle passes the material in the pillar chamber, and then the material is pulled and cut against the material along the abrasive orbit, and the abrasive wheel is rolled and cut to achieve the purpose of pulverization.
4. Composition of abrasive ultrafine pulverizer is mainly composed of a cylindrical pulverizing chamber, a polishing wheel and a polishing rail.
Second, the host structure separation device of the ultrafine pulverizer:
Adjusting the air flow in the pulverizer and affects the discharge speed.
Grinding tanks: mainly grinding. The discharge port: It is carried out, and multi-layer grading can be reached.
Pressure device: is a pressure. Pressure rod locking device: After reaching the fixed pressure, the ground is fixed. Wind selection mechanism: Select powder while taking the heat in the machine.
Welcome to Shandong AlPa Powder Technology Co., Ltd., what is the working principle of the pulverizer.
