Jet Mill is safe, through the previous article, we have had a preliminary concept of Jet Mill's use, and some of its basic knowledge, but there are more, we need us to discover and master,
To properly use the airflow classifier, it is also a classifier, or other types, such as the BF series mechanical grade machine, hoping to learn more updated knowledge.
Using the operation safety rules are:
(1) Before starting the grading machine, check all the connection portions, whether there is looseness, and whether the seal is good. There is also a rotating part, but also check whether it is flexible and reliable. Once an abnormality is found, it should be excluded immediately, otherwise the machine cannot be started.
(2) The direction of rotation of the motor should be rotated in accordance with the prescribed direction.
(3) Lubrication should be strictly in accordance with the requirements of the regulations, and different grease mix use is strictly prohibited.
(4) The water content of the material should be strictly controlled, otherwise it will affect product quality.
(5) The hierarchical belt drive shroud should check if it is tight, and it cannot be dismantled freely.
(6) The disassembly equipment should be performed in the case of power failure, and the total power supply should be cut.
(7) The electric control cabinet cannot be opened freely, and the non-professional person cannot operate to avoid danger. During the operation, some of the inspection contents of some parts are: bearings: temperature cannot exceed 70 ° C, whether it is lubricated in place, and has no lubrication.
Body: Whether the bolts are tightened, whether there is abnormal vibration or sound during operation. Motor: Water rise cannot exceed 60 ° C, whether there is abnormal vibration, odor or sound.
In general, the order of parking is: blocking the grading machine back sink - stopping water - waiting until all of the grooves in the groove is finished, press the stop button parking - put the spiral portion to the mine surface.
In this process, we must pay attention to the failure, to cut off the power immediately, and notify the professionals to overhaul, thousandYou can't deal with it, so as not to damage the equipment and happen.
