About Jet Mill Features, debugging and maintenance, organized.
high-speed Jet Mill, it is a crushing equipment For us, it is also an object of our study, so let's take a simple introduction and explanation of this crusher, I hope to let Everyone can understand other types of crushers while understanding Jet Mill.
high speed crusher, mainly for pharmaceutical, food, chemical, scientific research, metallurgical and other industries, is very wide, suitable for chemical materials, Chinese herbal medicines, etc., the dried and brittle materials such as Chinese herbal medicines.
1. Structural features
(1) low operating noise, high production efficiency, and smooth running.
(2) The material after pulverization can be discharged directly at the abdomen of the machine, and the pulverized particle size diameter of the particles can be adjusted by adjusting the aperture screen.
2. Debugging Once the machine is in place, it should be placed smoothly. Before you test the machine, you should clean the machine first. After the power is turned on, you should pay attention to whether the direction of rotation of the spindle is correct.
When testing, pay attention to whether the machine has an abnormal phenomenon, if there is a timely parking check.
3. Maintenance
(1) It is necessary to place smoothly to avoid vibration.
(2) Whether the rotation of the spindle is correct, and the correction is performed.
(3) Before the material starts crushing, first allow the machine to run for 30 seconds, and there is no abnormality before the material is smashed.
(4) The amount of input of materials cannot be too large.
After the material is pulverized, it should be cleaned to the pulverization room so as to ensure the purity of the material.
(5) Frequently check the lubrication, the color of the lubricating oil is black, and should be cleaned and replaced immediately because it has become metastasis. The above is some basic knowledge of the crusher, hoping to make everyone a probably aware of this crusher.
