About universal Jet Mill devices, what is the technical parameters and operational precautions for the universal Jet Mill device? Regarding the plastic crusher, the problem is:
What are the operating precautions of plastic crusher blades?
Since it puts forward, then the following will solve the problem, I hope that through the immature explanation of Xiaobian, you can make everyone harvest this, so that the understanding of the crusher can be more deeper.
1. Universal Crusher Technical Parameters Spindle Speed: 7000 Rotation / Difference Work Noise: <85 Dimensional Crushed Fine: 10-120 Trend of Film: 5 × 5 × 5mm Power:
1.Operation of Universal Crusher Precautions
(1) Before using, whether to tighten all fasteners, the belt is in a tension, whether the direction of operation of the spindle is correct, so as not to cause damage to the machine.
(2) There is no abuse or debris in the pulverizer, if it should be cleaned in time to avoid damage to the tool.
(3) Materials cannot be mixed in front of the pulverizer, so as not to damage the pulverizer.
(4) The pulverizer should be lubricated in accordance with the regulations to allow the machine to function properly.
(5) Crushers should be treated immediately if there is abnormalities to avoid greater losses.
(6) Some components should be checked regularly, if there is damage, it should be replaced immediately.
2. Operational precautions for plastic crusher blades
(1) The blade should be installed firmly. If there is loose moment, it should be tightly fastened, and the tension of the belt should be appropriate.
(2) The belt wheel should not be replaced, so as not to affect the normal use of the blade.
(3) After the blade is started, it should be idled 2-3min if there is no abnormality.
(4) The blade cannot be overloaded to avoid damage to the blade.
